How to Use the Oleo Panacea Water Pipe Adapter

Using the Oleo Panacea Water Pipe Adapter

1. Prepare the Device

• Make sure the Panacea is turned off and cooled before handling.

• Remove any herb residue from the chamber and clean as needed.

2. Remove the Standard Mouthpiece

• Hold the Panacea securely.

• Gently lift and pull off the magnetic mouthpiece from the top of the unit.

3. Attach the Water Pipe Adapter

• Take the supplied water pipe adapter.

• Align it with the opening where the mouthpiece was.

• Allow the adapter’s magnetic connection to snap into place securely.

4. Connect to Your Water Pipe

• Insert the tapered end of the adapter into the water pipe joint (usually 14 mm or 18 mm depending on your model).

• Ensure a snug fit but don’t force it.

5. Load and Heat

• Open the chamber, load your dry herb, and close it.

• Turn on the Panacea and set your desired temperature.

6. Inhale Through the Water Pipe

• Once the Panacea reaches the set temperature, draw slowly through the water pipe mouthpiece.

• The water will cool and filter the vapour.

7. After Use

• Power off and let the Panacea cool down.

• Detach the water pipe adapter.

• Clean the adapter and your water pipe regularly to maintain smooth airflow.

Tips:

• Always handle glass components with care.

• Check seals and magnetic connections before each use.

• Keep the water level in your water pipe moderate to avoid splashing back into the Panacea.